ERIKC 0 445 110 366 Bosch injector Auto Parts 0445110366 Common Rail Injection System 0445 110 366

1 injector detail

2 injector picture

3 injector FAQ

FAQ: Does fuel pressure affect injector flow? Click to collapse

ERIKC Answer:Yes, increasing fuel pressure will INCREASE the flow rate of the injector. DW injector flow rates are calculated at 3 bar (43.5 psi) of pressure. Although ERIKC injectors are able to operate at pressures in excess of 100 psi, we suggest a system pressure of 40-80 psi for best performance (faster injector response times, optimized spray patterns, and increased reliability of your entire fuel system). There is a calculator on the resources section of our website that will calculate your injectors’ flow rate at different pressures.

FAQ: What does the basic inner working parts of a fuel injector consist of?

ERIKC Answer: Most ERIKC fuel injectors consist of a body that houses an electromagnetic coil and a sealing mechanism such as a pintle, ball or disc. These sealing mechanisms are usually kept closed by means of a spring.

Erikc Injectors are fully open or fully closed. The amount of fuel injected is determined by how long the injector is open or by how long the pintle, disc or ball is removed from its seat.

FAQ: What is the difference between low impedance and high impedance injectors?

ERIKC Answer: The majority of injectors are high impedance. Low impedance (peak and hold) injectors have a resistance of between 2 and 4 ohms. High impedance (saturated) injectors have a resistance of between 10 and 14 ohms. Low impedance and high impedance injectors cannot be used interchangeably without modierikcation of the injector drivers.

4 Contact way

Joe (Manager) ready to reply to your messages

bosch cummins injectors

bosch fuel injector parts

ERIKC 0 445 110 366 Bosch injector Auto Parts 0445110366 Common Rail Injection System 0445 110 366 Images